Getting a hydrogeological survey

The owner of a care home employed us to undertake an independent hydrogeological survey (a prognosis) to determine whether they could have a borehole on their site.

This survey or prognosis is an essential requirement before any drilling commences.

The survey provides an indication of the underlying hydrogeology – detailing the nature of the ground to be drilled, the likely depth at which water will be found and an indication of water quality.

The results of a prognosis enable the borehole design to be properly specified. Whilst the prognosis is not a guarantee of success it will highlight any potential areas of concern at an early stage, enabling us to overcome them.

The information from the prognosis report enabled us to produce a more accurate estimate of the projected costs prior to any further commitment from the client as well.

What happens after the prognosis?

The client was satisfied the capital outlay for a borehole would quickly be reaped from savings made on the mains water supply.

The associated works involved maintaining the mains water as a back-up to the private water supply so that the care home would never be without water.

In recent years the water industry has become aware of an increasing level of alternative supplies, like boreholes, and the system must be correctly designed and installed, and be adequately maintained.

This can only be achieved through the installation of a Type AB air gap to separate the mains water supply and the alternative water system.

The British Standards have published documents on alternative supplies i.e. boreholes as an alternative supply which is BS8525-1-2010.

Once the client gave us the approval to proceed, the total system design was considered before drilling the borehole and the installation of the equipment.

To improve the standards of the borehole supply, the following key points of the installation are highlighted.

The borehole enclosure is a non-degradable GRP cabinet which prevents ingress of rain water.
Pre-insulated enclosure with 50mm insulation.
Unit colour can be matched to any RAL colour for customer requirement.
Size of GRP can be customised to each installation if required.
Each enclosure is lockable.
Adjustable ventilation to allow installation to breathe.
Extended lip for securing down and sealing against concrete.
Extended concrete pad 150mm above ground level.

Installation protected against UV damage, overheating or freezing.
An additional frost watcher heater can be added.
Isolation point for customer maintenance.
5 Micron pre-filter before storage tank.
System pressure indicator for maintenance records.
Well cap glued to well casing complete with gasket, waterproof glands and fittings.
Borehole raised a minimum of 150mm above floor level.
Borehole completed to industry “best practice” standards & fully grouted to prevent ingress of surface water.

Easy access for ongoing maintenance.
Labelled flow direction and type (borehole).
Our contact details for future backup.
Added frost protection to prevent freezing.
Alarm indicator.
System pressure indicator.
Added frost protection to prevent freezing.
Pump alarm indicator.

Two 5 micron pre filters prior to Ultra Violet sterilisation unit.
UV protection for bacteria control.
UV lamp status indicator.
Local sampling point.
Mains water backup in case of borehole pump failure.
System isolation points.
AB compliant water storage tank.
Documentation for all equipment, including customer training.

Could you save significant sums with a private water supply?  Heavy water using businesses can often make financial savings - contact us to find out whether a private water borehole is right for your home or business.